Instructions for Use

Hard Wax Instructions For Use

  1. Pour wax beads into a professional wax warmer.
  2. Heat up the wax until the consistency is creamy such as honey or molasses (normally takes about 20-30 minutes depending on the size of warmer).
  3. Test temperature of wax on the inside of your wrist.
  4. Always use a new spatula for each application -NO DOUBLE DIPPING! Using the edge of a wax spatula, apply a thin layer of wax in the direction of the hair growth using smooth and firm pressure.
  5. Wait a couple of seconds for the wax to cool. Stretch the skin tight during removal. Remove wax in one quick, swift motion parallel to the surface of the skin in the opposite direction of the hair growth.
  6. Repeat as needed.

Note: Normally only one application is needed for each area. If necessary, a cleanup strip should remove any "stragglers" left behind.   Rarely will you need to use a third application over the same area if you're using the wax properly. We have a variety of online training or email support@mermaidwax.com for more help.

Soft Wax Instructions For Use

  1. Put the soft wax can into a professional wax warmer.
  2. Heat up the wax until the consistency is creamy such as honey or molasses (normally takes about 20-30 minutes depending on the size of warmer).
  3. Always use a new spatula for each application -NO DOUBLE DIPPING! Using the edge of a wax spatula, apply a thin layer of wax in the direction of the hair growth using smooth and firm pressure.
  4. Apply a muslin strip over the soft wax and push down to ensure the strip is securred to the wax. Stretch the skin tight during removal. Remove the strip in one quick, swift motion parallel to the surface of the skin in the opposite direction of the hair growth.
  5. Do not go over the same area more than once. If you do, this can cause the skin to lift.
  6. After you are finished waxing, apply a post waxing lotion or post waxing oil to sooth the skin.

Concentrated Bomb Instructions For Use

Please Note: No more than 1 concentrated bomb per 1lb of wax. It's best to use sparingly vs too concentrated to avoid performance degradation, skin staining, irritation, etc.

Shells

  1. Keep the bomb in the small bag and place the bombs in the freezer for 1hr.
  2. Take out of the freezer and use a hammer to smash and break the bomb whilst still inside the bag -to save a mess. 
  3. Open the bag and use the desired amount in your wax warmer. Add more pieces as necessary for desired look/fee. 

Mermaids

  1.  You can “snap” it at the tail, waist or head fairly easy without needed to freeze.
  2. Decide how much wax you're going to use with the Mermaid. ie 1lb, 5lb, 10lb of wax
  3. Toss in the Mermaid or portion of Mermaid you'd like to use and stir.
  4. As the concentrated bomb melts the glitter will disperse in your wax. Stirring will increase even distribution.
  5. Add additional portions of bomb or bombs as you desire (no more than 1 bomb/lb of wax)

As the bombs melt your wax to change before your eyes! Feel free to mix bombs to create even more fun w/colors, scents, glitter & skin additives!

*You’ll Want to Break your Bomb for use in Smaller Wax Warmers*